Our Brands
iwata anest logo
airbrushes + compressors
iwata logo
airbrush accessories
medea airbrush logo
airbrush-ready paints
medea airbrush logo
airbrush beauty products
artool logo
templates, masking + tools
karajen logo
hanging +storage systems
anest iwata logo
spray guns + equipment

Start Airbrushing – part 3


Part 3: Airbrush Colours

Textile Airbrush Colors by Medea

Medea Textile Airbrush Colors are designed specifically for use with the airbrush, but can also be applied with a paintbrush. These pre-reduced colors are available in both opaque and transparent formulas.

There are 27 rich, dense colors in opaque that spray smoothly and resist clogging. Textile heavily-pigmented opaque paints produce brilliant results and accurate four-color separations when reproduced. They are available in 1, 4, 16, and 32 ounce and gallon sizes. Also available are six neutral grays, along with warm and cool additives, for black and white photographic retouching or illustration.

The Textile transparent colors are a perfect match for the Textile opaque colors. Eighteen non-fading, permanent transparent colors are available. These are intermixable with the opaques, can be worked over top for glazing techniques, and are available in the same sizes as the opaques.

Medea Airbrush Cleaner is used for cleaning the airbrush when using these or any other water-soluble paints. It is ready to use, fast-acting, odorless and environmentally safe. Remember?always spray in a well-ventilated area whenever using airbrush paint or cleaner.

TIP: Medea Airbrush Cleaner can also be used as a liquid eraser for Medea Textile Colors. When working on a smooth surface (hot press), Textilet opaque and transparent colors can be wiped off with Medea Airbrush Cleaner. Use a little cleaner on a cotton swab, paper towel or soft rag to clean off large areas of paint or wipe down to the white illustration board for bright highlights. Practice this technique; you?ll find it helpful.

Heat-Setting Instructions:

—Conveyer: 320 degrees for 20 minutes.

—Heat Press: 375 degrees for 30 seconds.

—Conventional Iron: Cotton setting for 2 minutes.

—Heat Gun: Rotating motion for 30 seconds.

Click to go to Part 4.

Reprinted with permission of ARTtalk.com


Why are there no prices on your website?

Iwata Medea is the wholesale distributor of Iwata, Medea and Artool products in North and South America, and the UK, and does not sell directly to customers at this time. To purchase Iwata Medea or Artool products, please check our dealer pages for a reseller near you. Or call our customer service team at 503-253-7308 ext. 2000, and we’ll help you find a local reseller.